dimensions are shown in mm (inch) dimensions subject to change 63 d subminiature combo d ? 40 a high power 90 ? standard footprint .489 or .454 inch (size dd) screw lock, boardlock, and signal contacts removed for clarity screw lock, boardlock, and high power contact removed for clarity part numbers with metal bracket and rivnut #4-40 unc shell size layout part number without screw locks without boardlocks part number without screw locks with boardlocks part number with screw locks without boardlocks part number with screw locks with boardlocks dd 24w7 ddmp24h7sja197 ddmc24h7sja197 ddmd24h7sja197 ddmg24h7sja197 dd 36w4 ddmp36h4sja197 ddmc36h4sja197 ddmd36h4sja197 ddmg36h4sja197 dd 43w2 ddmp43h2sja197 ddmc43h2sja197 ddmd43h2sja197 ddmg43h2sja197 dd 47w1 ddmp47h1sja197 ddmc47h1sja197 ddmd47h1sja197 DDMG47H1SJA197 note: for contacts with 30 microinches gold substitute k126 for a197. example: ddmp24h7sjk126 0,76 (.030) 3,18 (.125) 2,92 (.115) d boardlock 10 a c b e 13,74 (.541) 10,06 (.396) 6,50 0,25 (.256 .010) screw lock #4-40 unc rivnut #4-40 unc bracket, metal 20,57 0,38 (.810 .015) l 3,89 (.153) min 5,68 (.224) 2,84 (.112) f w 11,53 0,25 (.454 .010) 4,33 0,38 (.170 .015) dimensions shell size a 0,38 (.015) b 0,13 (.005) c 0,13 (.005) d 0,13 (.005) e 0,38 (.015) f 0,25 (.010) w 0,38 (.015) l 0,25 (.010) dd 66,93 (2.635) 52,42 (2.064) 61,11 (2.406) 10,74 (.423) 15,37 (.605) 10,90 (.429) 6,94 (.273) 0,76 (.030) connector footprint measured from the front shell. connector footprint measured from the rear shell. receptacle engaging face reader?s resource for contact cavity arrangements, see page 223. for p.c. hole patterns, see page 249. for panel cutouts, see page 221. for alternate bracket configuration (when connectors are supplied without boardlocks), see page 226. note: dimension varies with alternate bracket configuration, see page 226.
|
